Control Axes:
1. Control axes: 5 axes (X, Z, Y, 4th and 5th)
2. Interpolation axes: X, Y, Z, 4th and 5th linear interpolation; X,Y and Z three axes linear and spiral
interpolation, any two axes arc interpolation;
3. PLC control axes: 5 axes
Feeding axis function:
1. Minimum command unit: 0.001mm or 0.0001mm can be selected
2. Position command range: ±99999999 × minimum command unit
3. Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; (0.0001mm,
the maximum speed is 24m/min)
4. Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment;
5. Feeding override: total 16 levels: 0~150%, real-time adjustment;
6. Interpolation mode: linear, arc and spiral interpolation and rigid tapping
7. Auto chamfering
Acceleration and deceleration function:
1. Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.
2. Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.
3. Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.
4. The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
Spindle function:
1. Analog voltage 0V~10V output in two channels, support two-spindle control
2. Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r~5000p/r)
3. Transmission ratio between encoder and spindle is:(1~255):(1~255)
4. Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm~9999rpm.
5. Spindle override: total 8 levels: 50%~120%, real-time adjustment
6. Spindle constant surface speed control
7. Tapping cycle/rigid tapping
Tool function:
1. Tool length compensation
2. Tool radius compensation (C type)
3. Tool wearing compensation
4. Tool life management
Precision compensation:
1. Backlash compensation
2. Pitch error compensation in memory type
PLC function:
1. PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.
2. PLC program communication download
3. Support PLC warning and PLC alarm
4. Support many PLC programs (maximum 16), the current running PLC program can be selected
5. Basic I/O: input in 40 points/output in 32 points
Man-machine interface:
1. 7.4″large screen LCD, the resolution is 234×480
2. Display in Chinese, English, Spanish or Russian, etc
3. Display in processing path and it can real-time zoom in and out, translation and scroll lock.
4. Real-time clock
Operation management:
1. Operation mode: Edit, auto, MDI, machine zero-return, MPG/single step, manual and DNC.
2. Operation authority of multiple levels management
3. Alarm record
Editing program:
1. Program capacity: 40M, 10,000 programs (including subprograms, macro programs)
2. Editing function: program/block/characters research, rewrite and delete
3. Program format: ISO code, support macro command programming in sentence type
4. Calling program: It supports macro program with parameter, subprogram nesting of 4 layers
Communication function:
1. RS232: Files of part program and parameter, etc can be transmitted in two-way, DNC real-time processing,
support PLC program, serial ports of system software upgrade.
2. USB: File operation, directly processing files, support PLC program, system software upgrade in flash disc.
Safety function:
1. Emergency stop
2. Hardware travel limit
3. Software travel limit
4. Data restoring and recovering